Raspberry Pi 3 speeds show from 55Mbits/s to 178Mbits/s with average transfer speeds kept high, stable and consistent. I have to assume the CPU on Zeros are the bottleneck. The increased speed over USB over the Zero family has to come with better processing power. The Raspberry Pi 2 and Raspberry Pi 3 shows, however big differences in speed. Both boards seem capable of the same performance and the average connection speed is high. You may ask why test the Raspberry PI 2 and 3 if they already have the LAN socket? I hope the chart below will answer your questions: We see a very similar performance from the Zero family, with the minimum speed of 56Mbits/s to 111Mbits/s on Zero W and 70Mbits/s to 108Mbits/s on Zero. Let’s kick things off with the built-in sockets to set up a baseline. I will test all the combinations to show you which interface allows the best connection. Raspberry Pi network speed test The EthernetĮach board can use the USB (3.0) Ethernet adapter (with USB2.0 speeds) (with the Raspberry Pi Zero and Zero W using a micro-female USB adapter) and in addition to that Raspberry Pi 2 and Raspberry Pi 3 have the built-in Ethernet socket. This should cover the test environment setup, but feel free to ask me any questions about it. The orientation of the adapter has been consistent across the tests. As the board and adapter orientation do matter, I tried to orient the board and the adapter in a way that would allow for the best internet speeds. The wireless performance tests have been done at 1m, 5m (through walls), 10m, and 20m. I have used Tasker to automate the iperf test, you can read about it here. I have verified the adapter on my PC with the test speeds in excess of 700Mbits/s.Įach board is tested with the same (latest at the time of writing Raspbian Pixel image) class 10 microSD card, the same power supply is used in all cases (an original adapter for indoor tests, and the battery bank for the range tests). The USB Ethernet adapter is backward compatible and auto-negotiation will determine the correct link speed. In few cases where results have been inconsistent, the additional tests have been done. The test will be run minimum 3 times in a short period of time. Each test is run with an iperf server running on the target device (I’d rather see some CPU action on the board itself) and the client (PC – Windows 10) is connected through a LAN cable (1Gb) to the Linksys WRT-1900ACS. This should lead to some interesting results as it turned out. Testing conditions of the Raspberry Pi network speed test 2019 Raspberry Pi Speed Test – including Raspberry Pi 4Įach board will be tested for speeds using:.RaspberryPi 3B+ test is coming up ( first benchmark & new test series).The Raspberry Pi network speed test covers the following boards: You can use a built-in WiFi, add a WiFi dongle, use an Ethernet socket, or add one via USB. There are four ways you can connect the internet to a Raspberry Pi board.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |